21 layer Fully Multi-Coated 6x ratio optical system
Side Focus control for parallax adjustment
30mm mono-tube chassis for superior strength
Long eye relief for high recoil and magnum calibres
Glass etched reticle with red illumination
6 levels of brightness with off positions in-between
110 MRAD exposed and locking turrets
Fast focus eyebell and high torque zoom ring
The TMX reticle was developed for long range, centrefire shooting and around the common principles of Mil-Dot spacing. As with Mil-Dot spacing, the series of hash marks represent a unit of angle called an mrad (milliradian) or mil for short. This is equal to a gap of 3.6 inches at 100 yards, or 3 feet at 1,000 yards. This is equivalent to 10cm at 100m, or 1m at 1,000m.
When magnification is set to 10 the TMX reticle allows for 16 mil spacing of hold-over to the outer edge of the field of view, along with 6 mil spacing of windage in each direction.
When used at 20x magnification it allows for 8 mil spacing of hold-over to the outer edge of the field of view, along with 3 mil spacing of windage in each direction, the TMX is a versatile reticle that provides aim points no matter how extreme the conditions.